Tidland Top Slitters
Tidland top slitters, Tidland bottom slitters, Helios top slitters, and Helios bottom slitters are high performance tools used in the converting industry. With close tolerances, they will run at higher speeds, requiring lower maintenance than other slitting units. The dish slitter has the ‘Rake’ angle forged into the blade and is commonly used for converting paper, film, and foil products. The flat shear slitter has no ‘Rake’ angle embedded into the blade. The ‘Rake’ is formed during the installation of the slitter.
Replacement Parts:
- Tidland 128401
- Tidland 131937
- Tidland 129831
- Tidland top flat slitters
TID128214-D2 – Top Dish Slitter
- OEM: Tidland
- OEM Part#: TID128214-D2
- Measurements: 3.543 OD X 2.362 ID X 0.047
- Compatible with Tidland equipment
TID128401-D2 – Slitter
- Tidland Top Dish Slitter Class II
- 5.906 OD X 3.1500 ID X 0.098
- 150 mm OD X 80 mm ID X 2.5 mm
- D2 material
TID128401-M2 – Slitter
- Tidland Top Dish Slitter Class II
- 5.906 OD X 3.1500 ID X 0.098
- 150 mm OD X 80 mm ID X 2.5 mm
- M2 Material
TID129831-52100 – Dish Slitter
- Tidland Top Dish Slitter
- 5.118 OD X 3.150 ID X 0.059
- 130 mm OD X 80 mm ID X 1.50 mm
- 52100 material
TID129831-D2
- Tidland Top Dish Slitter
- 5.118 OD X 3.150 ID X 0.059
- 130 mm OD X 80 mm ID X 1.50 mm
- D2 material
TID129833-CARBIDE – Top Dish Slitter
- Tidland Top Dish Slitter Class III
- Dimensions: 7.874 OD X 3.150 ID X 0.364
- Dimensions: 200 mm OD X 80 mm ID X 9.25 mm
- Carbide Material
TID129833-D2 – Top Dish Slitter
- Tidland Top Dish Slitter Class III
- 7.874 OD X 3.150 ID X 0.364
- 200 mm OD X 80 mm ID X 9.25 mm
- D2 Material
TID129839-D2 – Top Slitter
- OEM: Tidland
- OEM Part#: 129839-D2
- Measurements: 5.906 OD X 3.150 ID X 00.103
- Compatible with Tidland equipment
TID129876 – Textile Slitter
- OEM: Tidland
- OEM Part#: 129876
- Measurements: 7.874 OD X 3.150 ID X 00.157
- Compatible with Tidland equipment
- Crush Cut Knife or Score Cut Knife
TID131937-D2 – Flat Slitter
- Tidland Flat Slitter
- 3.543 OD X 2.362 ID X 0.048
- 90 mm OD X 60 mm ID X 1.20 mm
- D2 Material